How to Install an Electric Wall Heater – DIY Guide & Safety Tips
Introduction
Installing an electric wall heater can save money on professional fees, but it must be done safely. This guide covers hardwired vs. plug-in installation, tools needed, and step-by-step instructions.
1. Pre-Installation Checklist
- Check Electrical Capacity: Ensure your circuit can handle the load.
- Choose Location: Away from water, furniture, and curtains.
- Gather Tools: Screwdriver, wire stripper, voltage tester.
2. Hardwired Installation (Step-by-Step)
- Turn Off Power at the breaker.
- Mount the Heater on the wall (use included brackets).
- Connect Wires (black to hot, white to neutral, green to ground).
- Secure & Test before powering on.
3. Plug-In Installation (Simpler Option)
- Just mount and plug into a dedicated outlet (no wiring needed).
- Avoid extension cords (fire hazard).
4. Safety Tips
- Always hire an electrician if unsure.
- Use GFCI outlets in bathrooms.
- Test the heater before regular use.
Conclusion
With the right precautions, installing a wall heater can be a DIY project. But if you’re uncomfortable with wiring, professional installation is best.
